62
edits
How to install OS/2 Warp 4: Difference between revisions
Started on the installation tutorial, will add images in a mo.
(This page is getting there, and I'll finish writing it at some point, if you want to expand the "about" section, please do. At some point a proper overarching "OS/2" page should also probably be done, as well as a "Running OS/2 Warp in QEMU" or whatever.) |
(Started on the installation tutorial, will add images in a mo.) |
||
|
At this point you need to decide how you're going to run the OS. The easiest option is virtualisation, and that what we'll cover here. You '''can''' run on physical hardware, but make sure you plan as to what drivers and extra software you'll need.
==Running OS/2 Warp 4 on Microsoft
The process of installation is similar on most virtualisation platforms, and OS/2 Warp 4 also works well on QEmu and VMware. Virtualbox is not recommended. However, if you are running Windows 8.1 and lower,
If you want a quick way to try out OS/2 on VMware, a premade disk image is also available [https://archive.org/details/ibm-os2-warp-4.52-vmdk here]. It comes installed, with some software included.
===Initial Setup===
At that stage, we'll create a new virtual machine and verify we have the right discs.
If you have 2CD's then you should have one labelled "Boot", and another "Install", keep track of them as we'll be flipping between them quite a bit.
#Firstly, open up Virtual PC 2007, and create a new VM. No specific settings are required however the following are recommended:
#*Select the OS as OS/2, naturally.
#*512MB of RAM is plenty.
#*A hard disk size of even 4GB is probably enough, especially with shared folders.
#Next, and this is important, ensure "Hardware Virtualisation" is disabled. Otherwise the system will never boot.
#Ensure you know where you installation media are, and go ahead and boot up the VM.
===Disc Swapping, and Disk Partitioning===
At this point the VM won't do much beyond goto into PXE Network Boot. So let's start the initial install, it's gonna take a while.
Now this guide assumes you have a copy with 2 CDs, if you have floppy disks, just follow a similar process, but insert the required floppy disks at the right time, starting with the boot floppy.
#Go up to CD -> Capture ISO Image..., and select your OS/2 Warp 4 Boot Disc.
#Reboot! (Action -> Reset, or hit Right Alt+R)
#Firstly, you'll see a splash screen, just saying OS/2.
#Then you'll see a boot screen.
#And then another screen saying "Loading, please wait..."
#Eventually, you'll get a blue prompt for the "OS/2 Warp CD-ROM", referring to the Install CD. So go ahead and insert that, and then hit enter.
#:By the way, if you get your mouse stuck in the window, hit Right Alt to release it.
#Congrats! You bought OS/2 for some reason. We have Netscape and JAVA. Enjoy.
And with that, welcome to the installation program, and the first step, partitioning, with probably one of the worst partitioning programs ever created.
#It'll tell you the "phases", Press Enter to begin.
#It's now going to give you a slightly cryptic prompt so let's explain.
#*OS/2 is slightly special in that instead of installing directly to a physical partition, it uses a system called LVM (Logical Volume Management).
#*This '''requires''' you to first create a physical LVM Partition, and then a logical volume within that.
#*The "Volumes Too Small" message is saying that it cannot find a Volume of any decent size, in fact it can't find one at all, because you haven't created it.
#*:It does handily tell us that we need at least 120MB.
#So after that hit Enter to access... Logical Volume Management Tool. Ok here we go.
#*Firstly it hits you with the wonderfully worded "A volume of the following minimum size must be set installable".
#*After hitting enter, you enter... something. You are presented with CDROM 1, and no disk partitions?
#*At this point, you might see the hotkey for "Physical View", and hitting F5 brings you that screen.
#*You can now see your hard disk, and the partitions on it. Logic tells you that you can probably select this free space by pressing TAB to access the window, and hitting enter for options.
#*;However, this is all a red-herring. Allow me to present you with the real solution.
Let's enter the inner machinations of an IBM employee, and partition the disk.
#Hit enter on the CD Drive, yes the CD Drive. You get a giant menu with two options available.
#Select "Create a New Volume". And then: "Create a volume that can be made bootable".
#Select >C:<
#Go ahead and give it a fancy name.
#Now we are brought to the Physical View, where can select the disk to create the Volume Partition.
#Press enter to select your own Disk.
#Select "Allocate from free space", and press Enter to give it the maximum available.
#Again give it a name, no too fancy this time, the default is fine.
#And the size.. again.
#At this point it finally brings us back to the Logical View, where we have our Logical Volume, and Logical Partition.
#Press Enter on our new volume, and Select "Set the volume installable".
At this point we can press F3 to exit the program. '''Make sure to select "Save the changes and exit".'''
Now the system must be restarted.
#First, release the install media.
#Insert the Boot Media.
#Hit Ctrl-Alt-Del to Reboot!
A word of Warning:
'''OS/2 WILL reboot WHENEVER you hit the Ctrl-Alt-Del keys, it doesn't care what you're doing, so be careful!'''
===Actual Installation===
After that nightmare, the rest of the installation isn't too difficult.
(Rest of the install to follow!)
==Actually using the OS==
| |||