UserVM Handbook/Windows

Revision as of 17:53, 6 August 2024 by Undefishin (talk | contribs)

This guide details how to set up a UserVM on a host machine running Microsoft Windows.

The Rules

First, the boring part. We ask that all hosts review and follow the UserVM Hosting Rules.

Prerequisites

You'll need:

  • A machine with decent specs (8GB of RAM and a modern CPU, probably)
  • Microsoft Windows 10 or later. For Linux, see the main UserVM Handbook.
  • A decently fast network that allows you to forward a port. We will not accept UserVMs behind services like ngrok. Cloudflare tunnels are fine. You must also have a URL that stays persistent. If your IP is dynamic, you can use services like NOIP or setup a script to auto-update your domain using cloudflare.
  • Basic knowledge of how computers and Windows systems work. We aren't going to hold your hand, you need to be comfortable with a command line
    • IF YOU DO NOT UNDERSTAND HOW TO FOLLOW THE INSTRUCTIONS IN THIS GUIDE, DO NOT HOST PUBLIC INTERNET CONNECTED VMS ON THE INTERNET THAT ANYONE CAN ACCESS
  • A few hours

Compiling the server

Install dependencies

Open Command Prompt as administrator.

First, install the Chocolatey package manager. If you already have it installed, you can skip this step.

powershell -c "Set-ExecutionPolicy Bypass -Scope Process -Force; [System.Net.ServicePointManager]::SecurityProtocol = [System.Net.ServicePointManager]::SecurityProtocol -bor 3072; iex ((New-Object System.Net.WebClient).DownloadString('https://community.chocolatey.org/install.ps1'))"

Restart CMD to apply the changes to PATH. Now, we'll install the various dependencies CollabVM has:

choco install qemu git nasm cmake nodejs nssm rust-ms visualstudio2019-workload-vctools
refreshenv

Enable corepack:

corepack enable

Prepare the server

We can now get the server ready. First, create a directory for all CollabVM related files. For the purposes of this guide, we use C:\collabvm. If you use a different directory, be sure to substitute it in all future commands.

mkdir C:\collabvm

Clone the CollabVM server source:

git clone https://github.com/computernewb/collabvm-1.2.ts.git C:\collabvm\collabvm-1.2.ts --depth 1 --recursive
cd C:\collabvm\collabvm-1.2.ts

Install dependencies and build the server:

yarn
yarn build

Set up your VM

Now is a good time to get your VM set up. Currently, the only supported hypervisor is QEMU. We have many guides on this wiki for setting up different OSes in QEMU, check them out here. Here are some ideas to make your VM interesting:

  • A funny wallpaper
  • Development software (Visual Studio, etc.)
  • Some games
  • Some harmless malware (for the love of god no GDI rapists)

Windows Hypervisor Support

By default, QEMU uses the TCG software emulator, which is very slow. You can greatly increase the speed of your VM by enabling Windows Hypervisor.

First, enable the Windows Hypervisor:

dism /online /enable-feature /featurename:HypervisorPlatform

Reboot your system to apply changes

Now, you can enable WHPX hypervision by using the -accel whpx argument somewhere in your QEMU command line. If you're copying your QEMU command from somewhere that expects KVM (which is the Linux equivalent to the Windows Hypervisor), make sure you REPLACE the -accel kvm with -accel whpx in the command or it will not run.

Note that there is also a fork of QEMU that uses the Android Emulator Hypervisor Driver, which may be faster than the Windows Hypervisor but is also known to be very buggy.

Setting up a Virtual Network

TODO: Windows version of CollabNet Guide host shit using OpenVPN wintun bullshit (pain)

Configuration

Now we need to fill out the config file for your VM. Copy config.example.toml to config.toml, and open it in an editor. It is well commented so each value should be self-explanatory. If you have questions, feel free to ask in our Discord server.

QEMU Args

On Windows, if QEMU is installed to the default directory, you'll need to configure your qemuArgs like this:

qemuArgs = "C:\\Program\ Files\\QEMU\\qemu-system-x86_64.exe [args]"

Example of a production QEMU command:

qemuArgs = "C:\\Program\ Files\\QEMU\\qemu-system-x86_64.exe -M q35,usb=on,acpi=on,hpet=off -cpu host -accel whpx -m 2G -smp cores=2 -device usb-tablet -nic none -hda C:\\collabvm\\images\\vm1.qcow2"

Running your VM

Now that everything is set up, you can bring your VM online. To run the server right from your terminal, run the following command:

yarn serve

Or alternatively, to run it directly:

node cvmts/dist/index.js

Running a local webapp

Before you put your VM on the UserVM roster, you'll probably want to test it out for yourself. For that, we'll throw up a test webapp. Start by cloning the source:

cd C:\collabvm
git clone https://github.com/computernewb/collab-vm-1.2-webapp.git --recursive
cd collab-vm-1.2-webapp

Then, copy config.example.json to config.json, and replace ServerAddresses with your server address:

    "ServerAddresses": [
        "ws://127.0.0.1:6004",
    ],

Now you can build the webapp, and serve it:

yarn
yarn build
yarn serve

This will run the webapp at 127.0.0.1:1234, which you can navigate to in your browser. If all went well, your VM should show up. If not, and you don't know why, join our discord and ask for help there!

Setting up a service

We will now set your VM up as a background service using the NSSM runner.

In admin CMD:

nssm install collabvm

This will open the NSSM setup GUI. Configure each page as follows

Application

Path: C:\Program Files\nodejs\node.exe

Startup directory: C:\collabvm\collabvm-1.2.ts

Arguments: C:\collabvm\collabvm-1.2.ts\cvmts\dist\index.js

Details

Startup type: Automatic if you want your VM to start with your computer, Manual if you want to start it manually

Log on

Log on as: Virtual Service Account (very important for security)

I/O

Output (stdout): C:\collabvm\out.log

Error (stderr): C:\collabvm\err.log


Permissions

Give the CollabVM Virtual Service User permissions to the C:\collabvm directory:

icacls C:\collabvm /grant "NT SERVICE\collabvm:F" /Q /C /T

NOTE: If you encounter permissions errors when running the CollabVM service after adding new VM images, run this command again.

Starting the service

You can now start your VM with:

net start collabvm

And stop it with:

net stop collabvm

Setting up reverse proxying

This is REQUIRED for UserVM as, for technical reasons (mostly because Computernewb is a HTTPS site and browsers don't like mixed HTTP and HTTPS content), only TLS-equipped WebSockets can be accepted

We strongly recommend you proxy your UserVM behind Nginx, to provide additional security and allow things like TLS. It also makes your VM look a lot cleaner, allowing people to access it on your main HTTP(s) port and on a subdirectory, like https://example.com/collab-vm/ rather than http://example.com:6004. Here's a brief tutorial of how to set that up on the Nginx side.

This assumes you're setting up a Nginx site from scratch. If not, you can skip most of this and just add the relevant config snippets to your configuration.

First, you'll need to acquire a domain. You can also get free subdomains from https://freedns.afraid.org. Make sure your domain or subdomain is pointed to your IP address and ports are open.

Next, install nginx:

choco install nginx

Then, you'll want to save wsproxy_params to your Nginx directory, which enables WebSocket proxying.

cd C:\tools\nginx*
curl https://computernewb.com/~elijah/wsproxy_params -o wsproxy_params

If you use Cloudflare reverse proxying, make SURE to open this file and uncomment the indicated line.

Create a directory to store site configurations:

mkdir sites

Open up conf\nginx.conf and add the following to the bottom of your http { ... } block:

map $http_upgrade $connection_upgrade {  
    default upgrade;
    ''      close;
}
include ../sites/*.conf;

Now, create a configuration for your nginx site that includes a proxy statement for your VM.

C:\tools\nginx-[version]\sites\example.com.conf

server {
    server_name example.com;
    listen 80;
    index index.html;
    # You can change this to the absolute path of your site's webroot, or leave it if you don't have a site other than CollabVM
    root html;

    location /collab-vm/vm1 {
        include ../wsproxy_params;
        proxy_pass http://127.0.0.1:6004/; 
    }
}

The last step is to set up SSL (if you use Cloudflare reverse proxying you can skip this as Cloudflare will handle SSL for you). Install win-acme:

choco install win-acme
refreshenv

Create a directory for the SSL certs:

mkdir ssl

Grab the certs. Example command:

wacs --host example.com (REPLACE WITH YOUR DOMAIN) --webroot html (REPLACE WITH YOUR WEBROOT IF YOU CHANGED IT) --validation filesystem --source manual --store pemfiles --pemfilespath ssl --accepttos

Install the certs to your nginx conf:

C:\tools\nginx-[version]\sites\example.com.conf

server {
    server_name example.com;
    listen 80;
    listen 443 ssl;
    ssl_certificate ../ssl/example.com-chain.pem;
    ssl_certificate_key ../ssl/example.com-key.pem;
}

Finally, restart nginx to apply the config

net stop nginx
net start nginx

If all went well, your VM is now available at wss://example.com/collab-vm/vm1

Permanently host the webapp

If you want to host the webapp on your website, you can build it as follows:

cd C:\collabvm\collab-vm-1.2-webapp
yarn build

Then, copy the contents of the dist directory to your website. For example, if your webroot is at /var/www/example.com, and you want your webapp at example.com/collab-vm/:

xcopy /S /Y dist C:\path\to\your\webroot\collab-vm\

The webapp should now be accessible at your website.

Logging in as an admin (or mod)

Logging in is very simple. Just join the VM, and double click your username. Enter your admin or mod password into the prompt, and you should be authenticated and able to use staff actions.

Getting your UserVM on the roster

Now you can have your UserVM put on the roster! Join our Discord, and create a post in #support with the uservm roster update tag, including your VM's WebSocket URL. You can ping me (@elijahr.dev) if you'd like.