WireGuard Tunnel: Difference between revisions

WIP

Welcome to the official guide on setting up a WireGuard Tunnel. This is useful if you do not want to directly port forward to the internet (e.g. using your own IP to host UserVMs).

 

 

You can test if the port forward is working by running <code>netcat -l -p 6004</code> on the client that you forwarded the port from. If the port forward is working properly, <code>netcat SERVERIPHERE 6004</code> should allow you to send messages back and forth from both machines.

You can also test this by setting up a UserVM on your client with the [[UserVM Handbook]].