Revision as of 04:58, 31 July 2022

< VM7

VM8 is the 2nd Installfag VM in CollabVM however it has lower specs. This is meant to be compatible with older operating systems that cannot run on VM7. The VM was announced on December 30th, 2021 by modeco80. The VM comes with a Pentium 3 CPU, 512 MB of RAM, and 12 GB of hard disk space.

The announcement of VM8.

OS Compatibility Reference Sheet for VM8

OSes confirmed to work on VM8

Windows 8 build 8305 or earlier
TinyVista, Tiny7
Windows XP - While it is perfectly normal (except when shutting down or rebooting), you should just use VM2.
Windows 2000
Windows NT 3.5, 3.51, 4.0
Windows 95, 98 and ME - ME works the best somehow while on 95 and 98 you have to do modifications to make it run good.
Windows 3.11 - Use qemumouse.img from Lily's ISO directory for working mouse.
Windows 1.0
MS-DOS
ReactOS
Any 32-bit GNU/Linux distribution
eComStation and OS/2 - Everything is fine aside of USB-tablet
9front
Minoca
GNU/Hurd
FreeBSD - You'll have to use the VM image on the FreeBSD FTP as installer doesn't work correctly
Xenix
Many hobbyist OSes although some don't have support for the RTL8139 or just doesn't support USB-tablet

OSes that barely work

Windows Vista, 7, 8, 8.1, 10 - Will work if you load a 32-bit slim ISO. 8.1/10 barely runs since it only has 512 MB of RAM. 8, 8.1 and earlier Windows 10 builds require patching for running without NX.
SerenityOS - WindowServer fails to start
QNX 6 - Runs fine but non-functioning mouse despite USB stack and USB mouse module for all HCIs running.

OSes that do not work on VM8

Doesn't work properly

JX, Ghost Kernel - Requires a PS/2 Mouse or you can't utilize the OS not even with keyboard shortcuts.

Doesn't work at all

NewOS, ArcaOS - Locks up at booting due to KVM
OpenSolaris, UnixWare, OpenServer - Bootloops
Windows 11 - Will not boot at all unless Microsoft releases a 32-bit version.
Windows Vista betas (Longhorn, post-reset) - Massive graphics issues (VM7), would likely not work at all.

Untested OSes

Windows Vista betas (Longhorn, pre-reset)
Windows Whistler
Windows 2.x - Tip: qemutab.img has a usb-tablet driver for 2.x, use it for working mouse.
Everything else

@@ Line 3: / Line 3: @@
 : [[VM7|< VM7]]
-VM8 is the 2nd Installfag VM in CollabVM however it has lower specs. This is meant to be compatible with older operating systems that cannot run on VM7. The VM was announced on December 30th, 2021 by [[modeco80]]. The VM comes with a Pentium 4 CPU, 512 MB of RAM, and 6 GB of hard disk space.
+VM8 is the 2nd Installfag VM in CollabVM however it has lower specs. This is meant to be compatible with older operating systems that cannot run on VM7. The VM was announced on December 30th, 2021 by [[modeco80]]. The VM comes with a Pentium 3 CPU, 512 MB of RAM, and 12 GB of hard disk space.
 [[File:VM8_def.png|thumb|right|VM8 when it is in its default state]]
@@ Line 11: / Line 11: @@
 == OSes confirmed to work on VM8 ==
 * Windows 8 build 8305 or earlier
-* Tiny7
+* TinyVista, Tiny7
-* TinyVista
 * Windows XP - While it is perfectly normal (except when shutting down or rebooting), you should just use VM2.
 * Windows 2000
+* Windows NT 3.5, 3.51, 4.0
 * Windows 95, 98 and ME - ME works the best somehow while on 95 and 98 you have to do modifications to make it run good.
 * Windows 3.11 - Use qemumouse.img from Lily's ISO directory for working mouse.
@@ Line 36: / Line 36: @@
 == OSes that do not work on VM8 ==
 === Doesn't work properly ===
-* Windows NT 3.1, 3.5, 3.51, 4.0 - BSODs on setup; Most likely due to early NT Kernel, You can install it manually using DOS. Another method is by using QEMU to install it directly to the hard drive.
 * JX, Ghost Kernel - Requires a PS/2 Mouse or you can't utilize the OS not even with keyboard shortcuts.

VM8: Difference between revisions